Bluerockt Wireless Tattoo Pen Machine with Magnetic Switch Base


  • Self-Protection Function: When the battery voltage is below 6V or overload, the red LED flashing and the machine does not work.
  • Two Power Modes: The wireless battery allows the tattoo artist to stay away from hooks and pedals and focus on artistic creation. The 8.4V DC wire is provided to tattoo artists who pursue ultimate stability.
  • Magnetically Controlled Base: Bluerockt tattoo pen is equipped with a machine base. When the machine is in working state, the machine is put on the machine base and the motor stops working. Enter standby, the RGB indicator lights flicker alternately. When the tattoo pen is picked up and left the base, the machine continues to work.
  • 6-Level Speed Selection: Switch operation is simple, the highest gear speed of 8200rpm. The tattoo pen adopts foreign high-quality hollow cup motor and unique internal design concept.

Function instructions:

1. Power switch: Install the battery or plug in the adapter, press the power switch button to release the power on, press and release the power switch again, the default fifth gear is turned on, and the green light indicates.

2. Green cycle button: Each time the button is pressed once to change gears, the first gear will be indicated by blue light, the slowest gear will be indicated by green light, the fifth gear will be indicated by green light, and the ninth gear will be indicated by the fastest red light. Gear cycle adjustment, start from 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 gears cycle... Adjust the gear that suits you according to the speed you need to use .

3. This tattoo machine is equipped with a base, and the base is equipped with a magnetic control switch. When the machine is turned on, put the machine on the base and the motor stops working. The RGB indicator lights flash alternately. Pick up and leave the base and the machine will work automatically.

4. Battery charging: Connect the charging cable and the battery to the USB plug and insert it into the charging adapter, the charging indicator turns red, and the charging indicator turns green when fully charged.

5. When the battery voltage is lower than 6V, the red LED flashes, other LEDs do not work, the motor has no output, and the motor overload will have the same output mode.


  • Charging adapter input voltage: 100-240V AC 50~60Hz
  • Charging adapter rated power: 10.0W
  • Maximum output voltage: 8.4V
  • Lithium polymer battery: 7.4V 760mAH
  • Net weight: 175g
  • Volume: 149*47.6*33.7mm
  • Needle out stroke: 0-0.38mm
  • Needle length: 3.3mm